LST Network Card RL58 1 User Manual

Relay Modules

RL58-1/RL58-2

• 8 or 4 relay outputs, respectively,

with one dry changeover contact

each

• Actuation display by LED for each

output

• Switch contacts on terminals

• Easy mounting on componentry

carrier

• Connection with control panel via ﬂat

cable

Description

The ﬁre detection control panels Series BC216 and The RL58-1 provides eight relay outputs with a maxi-

BC016, respectively, provide 16 freely programmable mum contact rating of 30W. The current is limited to 1A

open-collector control outputs. Eight of these outputs and the voltage is limited to 60VDC. The RL58-2 offers

are connected to a ﬂat cable connector. The Relay Mo- four relay outputs with a maximum of 5A/230VAC. The

dules RL58-1 and RL58-2 allow for the easy conversion terminal of the RL58-2 are designed for mains voltage.

of these control outputs to dry changeover contacts. Two relay modules RL58-2 are each cascadable via pin

The componentry is connected to the ﬁre detection con- connectors. The relay module is delivered with ﬂat ca-

trol panel via a ﬂat cable.

ble and mounting accessories for easy installation.

Speciﬁcations

Operating voltage

20 – 31VDC

Current consumption at 24V

Control current

typ. 22mA per activated circuit

typ. 1.2mA per input

-5°C to +50°C

Ambient temperature

RL58-1

Switching power per contact

Contact life

1A/60V/30W

approx. 5 mill. switching cycles (unloaded)

approx. 300,000 switching cycles (at 24VDC/1A)

Dimensions L × W × H

Weight

85 × 65 × 37 (mm)

330g

Part No.

222004

Order name

Relay Module 8-Fold/60VDC RL58-1

Building Safety. Building Security.

RL58_DBL_LST_EN_0804.PDF • PAGE 1